FSB/CPU External Frequency Synchronization
Front Side Bus |
| CPU External Frequency |
| ||
FSB 800 |
| 200 MHz |
FSB 533 |
| 133 MHz |
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency.
Configuration options: [Auto] [333MHz] [400MHz]
Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting.
DDR Voltage [Auto]
Allows selection of the DDR SDRAM operating voltage. Set to Auto for safe mode. Configuration options: [Auto] [2.50V] [2.60V]
Refer to the DDR documentation before setting the memory voltage. Setting a very high memory voltage may damage the memory module(s)!
CPU Vcore Over Voltage Control [Disabled]
Enables or disables the CPU Vcore over voltage control.
Configuration options: [Enabled] [Disabled]
Chapter 2: BIOS setup |