Chapter 4 SPA900 Series LCD Command Reference
9 Network
9.5 Current NetMask
Shortcut: Setup, 9, 5 save
To view the Current NetMask, press 5 from the Network menu, or scroll down to highlight NetMask and press the select soft key. The Current NetMask is set in one of the following ways:
•Receive the address from a DHCP server by enabling DHCP (option 9.1)
•Manually set the address using the Non DHCP Subnet Mask option (Option 9.9)
9.6Current Gateway
Shortcut: Setup, 9, 6 save
To view the Current Gateway, press 6 on the Network menu, or scroll down to highlight Current Gateway and press the select soft key.
The Current Gateway is set in one of the following ways:
•Receive the address from a DHCP server (you cannot edit it)
•Manually set the address using the Non DHCP Default Route option (Option 9.10)
9.7Enable Web Server
Shortcut: Setup, 9, 7, y/n, ok
To view the status of the Web Server, press 7 from the Network menu, or scroll down to highlight Enable Web Server and press the select soft key. To enable or disable the Web Server, press the edit soft key. Press the y/n soft key to toggle between Yes to No and press ok.
9.8 Non DHCP IP Address
Shortcut: Setup, 9, 8, ip_address, ok
To manually set the IP address, press 8 from the Network menu, or scroll down to highlight Non DHCP IP Address and press the select soft key. Then press the edit soft key. The display shows the option to enter an IP address. enter the IP address here. This IP address is always used by the phone (it is a static IP address). After entering IP address, press ok.
9.9 Non DHCP Subnet Mask
Shortcut: Setup, 9, 9, subnet_mask, ok
To manually set the subnet mask, press 9 from the Network menu, or scroll down to highlight Non DHCP Subnet Mask and press the select soft key. Then press the edit soft key. After entering the subnet mask, press ok.
9.10 Non DHCP Default Route
Shortcut: Setup, 9, 10, ip_address, ok
To edit the default gateway (router), press 10 or scroll down to highlight Non DHCP Default Route and press the select soft key. Then press the edit soft key. After entering the default route, press ok..
|
| Linksys IP Phone Administrator Guide |
|
| |
|
|
| |||
| Firmware Version 5.1 |
|
|
| |
|
|
|
| ||
