Linksys SPA 900 SERIES manual Getting Started

						Chapter 2 Getting Started
		Using the Interactive Voice Response Interface
Table 2-2 IVR Options (continued)
	Set Static IP Address			111	Enter IP address using	DHCP must be “Disabled,” otherwise you
					numbers on the telephone	hear, “Invalid Option,” if you try to set
					key pad. Use the * (star) key	this value.
					when entering a decimal	Requires password
					point.
	Check Network Mask			120	None	IVR announces the current network mask
						of SPA.
	Set Network Mask			121	Enter value using numbers on	DHCP must be “Disabled,” otherwise you
					the telephone key pad. Use	hear, “Invalid Option,” if you try to set
					the * (star) key when entering	this value.
					a decimal point.	Requires password
	Check Static Gateway IP			130	None	IVR announces the current gateway IP
	Address					address of SPA.
	Set Static Gateway IP			131	Enter IP address using	DHCP must be “Disabled,” otherwise you
	Address				numbers on the telephone	hear, “Invalid Option,” if you try to set
					key pad. Use the * (star) key	this value.
					when entering a decimal	Requires password
					point.
	Check MAC Address			140	None	IVR announces the MAC address of SPA
						in hex string format.
	Check Firmware Version			150	None	IVR announces the version of the
						firmware running on the SPA.
	Check Primary DNS			160	None	IVR announces the current setting in the
	Server Setting					<Primary DNS> parameter.
	Set Primary DNS Server			161	Enter IP address using	Requires password
					numbers on the telephone
					key pad. Use the * (star) key
					when entering a decimal
					point.
	Check administration web			170	None	IVR announces the port that the web
	server port					server is listening on. (Default is 80)
	Check LAN IP Address			210	None	IVR announces the current IP address of
						the LAN port.
	Check PBX multicast			180	None	IVR announces the current value.
	address
	Set PBX multicast			181	Enter IP address and port.	Enter a * between the IP address and the
	address				Use * key for entering a dot.	Port fields. Requires password
					For example,
					224.168.168.169:8089 is
					224*168*168*169*8089.
	Enable/Disable			7932	Enter 1 to enable	Requires password
	administration web server				Enter 0 to disable
			Linksys IP Phone Administrator Guide
	2-18					Firmware Version 5.1