Linksys SPA 900 SERIES manual Distinctive Ring Patterns

Chapter 5 Linksys IP Phone Field Reference

Regional Tab

Field	Description
Confirm Tone	Brief tone to notify the user that the last input value has been accepted.
	Defaults to 600@-16; 1(.25/.25/1).
SIT1 Tone	Alternative to the Reorder Tone played when an error occurs as a caller makes an
	outbound call. The RSC to trigger this tone is configurable on the SIP screen.
	Defaults to 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0).
SIT2 Tone	Alternative to the Reorder Tone played when an error occurs as a caller makes an
	outbound call. The RSC to trigger this tone is configurable on the SIP screen.
	Defaults to 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0).
SIT3 Tone	Alternative to the Reorder Tone played when an error occurs as a caller makes an
	outbound call. The RSC to trigger this tone is configurable on the SIP screen.
	Defaults to 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone	This is an alternative to the Reorder Tone played when an error occurs as a caller makes
	an outbound call. The RSC to trigger this tone is configurable on the SIP screen.
	Defaults to 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0).
MWI Dial Tone	Played instead of the Dial Tone when there are unheard messages in the caller’s mailbox.
	Defaults to 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2).
Cfwd Dial Tone	Played when all calls are forwarded.
	Defaults to 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2).
Holding Tone	Informs the local caller that the far end has placed the call on hold.
	Defaults to 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1).
Conference Tone	Played to all parties when a three-way conference call is in progress.
	Defaults to 350@-19;20(.1/.1/1,.1/9.7/1).
Secure Call Indication Tone	Played when a call has been successfully switched to secure mode. It should be played
	only for a short while (less than 30 seconds) and at a reduced level (less than -19 dBm) so
	it does not interfere with the conversation.
	Defaults to 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2).
Page Tone	Specifies the tone transmitted when the paging feature is enabled.
	Defaults to 600@-16;.3(.05/0.05/1).
Alert Tone	Played when an alert occurs.
	Defaults to 600@-19;.2(.05/0.05/1).

Distinctive Ring Patterns

Note None of the following parameters apply to the SPA901.

	Linksys IP Phone Administrator Guide
5-20	Firmware Version 5.1