
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Field | Description |
|
|
Daylight Saving Time Rule | Enter the rule for calculating daylight saving time; it should include the start, end, and save |
| values. This rule is comprised of three fields. Each field is separated by ; (a semicolon) as |
| shown below. Optional values inside [ ] (the brackets) are assumed to be 0 if they are not |
| specified. Midnight is represented by 0:0:0 of the given date. |
| This is the format of the rule: Start = |
| • The |
| daylight saving time. Each value is in this format: <month> /<day> / |
| <weekday>[/HH:[mm[:ss]]] |
| • The |
| current time during daylight saving time. The |
| a negative |
| is in this format: |
| • The <month> value equals any value in the range |
| • The <day> value equals |
| • If <day> is 1, it means the <weekday> on or before the end of the month (in other |
| words the last occurrence of < weekday> in that month). |
| • The <weekday> value equals any value in the range |
| also equal 0. If the <weekday> value is 0, this means that the date to start or end |
| daylight saving is exactly the date given. In that case, the <day> value must not be |
| negative. If the <weekday> value is not 0 and the <day> value is positive, then |
| daylight saving starts or ends on the <weekday> value on or after the date given. If |
| the <weekday> value is not 0 and the <day> value is negative, then daylight saving |
| starts or ends on the <weekday> value on or before the date given. |
| • The abbreviation HH stands for hours |
| • The abbreviation mm stands for minutes |
| • The abbreviation ss stands for seconds |
| The default Daylight Saving Time Rule is |
|
|
DTMF Playback Level | Local DTMF playback level in dBm, up to one decimal place. |
| Defaults to |
|
|
DTMF Playback Length | Local DTMF playback duration in milliseconds. |
| Defaults to .1. |
|
|
Inband DTMF Boost | Controls the amount of amplification applied DTMF signals. |
| Choices are OdB, 3dB, 6dB, 9dB, 12dB, 15dB, or 18dB. |
| Defaults to 12dB. |
|
|
| Linksys IP Phone Administrator Guide |
Firmware Version 5.1 |