Linksys SPA 900 SERIES manual Dchp, Current IP Address, Host Name, Domain

Chapter 4 SPA900 Series LCD Command Reference

9 Network

•9.10 Non DHCP Default Route

•9.11 Non DHCP DNS 1

•9.12 Non DHCP DNS 2

•9.13 Non DHCP NTP Server 1

•9.14 Non DHCP NTP Server 2

•9.15 Multicast Address

•9.16 Enable VLAN

•9.17 VLAN ID

•9.18 CDP

9.1 DCHP

Shortcut: Setup, 9, edit, y/n, ok

When DHCP is enabled, the phone obtains its IP address from a DHCP server.

To view DHCP status, press the Setupbutton and press 9, or scroll down to the Network option and press the select soft key. The displays shows 1 DHCP Enable with a Yes or No to indicate the current status.

To enable or disable DHCP, press the edit soft key and press the y/n soft key to toggle between Yes and No. After making the selection, press the ok button and the display returns to the Network menu.

9.2 Current IP Address

Shortcut: Setup, 9, 2 save

To view the current IP address, press 2 on the Network menu, or scroll down until Current IP Address is highlighted and press the select soft key. The Current IP Address is set in one of the following ways:

•Receive the address from a DHCP server by enabling DHCP (Option 9.1)

•Manually set the address using the Non DHCP IP Address option (Option 9.8)

9.3 Host Name

Shortcut: Setup, 9, 3 save

The Host Name is set by the administrator. The user cannot change the setting.To view the Host Name, press 3 from the Network menu, or scroll down to Host Name and press the select soft key.

9.4 Domain

Shortcut: Setup, 9, 4 save

The Domain Name displays the name of the domain in which the phone is operating and is not user configurable. To view the Domain, press 4 from the Network menu, or scroll down to highlight Domain and press select.

	Linksys IP Phone Administrator Guide
4-10	Firmware Version 5.1