Linksys SPA 900 SERIES manual Example 1 Normal Ring

Chapter 3 Managing Linksys IP Phones

Configuring the Web Service

•Example 1: Normal Ring

•60(2/4)

•Number of Cadence Sections = 1

•Cadence Section 1: Section Length = 60 s

•Number of Segments = 1

•Segment 1: On=2s, Off=4s

•Total Ring Length = 60s

•Example 2: Distinctive Ring (short,short,short,long)

•60(.2/.2,.2/.2,.2/.2,1/4)

•Number of Cadence Sections = 1

•Cadence Section 1: Section Length = 60s

•Number of Segments = 4

•Segment 1: On=0.2s, Off=0.2s

•Segment 2: On=0.2s, Off=0.2s

•Segment 3: On=0.2s, Off=0.2s

•Segment 4: On=1.0s, Off=4.0s

•Total Ring Length=60s

•ToneScript – A mini-script that specifies the frequency, level and cadence parameters of a call progress tone. May contain up to 127 characters. Syntax:

•FreqScript;Z1[;Z2]. The section Zi is similar to the Si section in a CadScript except that each on/off segment is followed by a frequency components parameter: Zi = Di(oni,1/offi,1/fi,1[,oni,2/offi,2/fi,2 [,oni,3/offi,3/fi,3 [,oni,4/offi,4/fi,4 [,oni,5/offi,5/fi,5 [,oni,6/offi,6/fi,6]]]]])

where fi,j = n1[+n2]+n3[+n4[+n5[+n6]]]]] and 1 < nk < 6 indicates which of the frequency components given in the FreqScript are used in that segment; if more than one frequency component is used in a segment, the components are summed together.

	Linksys IP Phone Administrator Guide
Firmware Version 5.1		3-17