C H A P T E R 3

Managing Linksys IP Phones

This chapter describes how to configure Linksys IP phones and includes the following sections:

Using the 900 Series LCD Display, page 3-1

Localization, page 3-5

Changing the Display Background (SPA942/962), page 3-7

Using the SPA932 (Sidecar) with the SPA962, page 3-8

Configuring the Web Service, page 3-14

Call Appearances and Extensions, page 3-21

Line Key LEDs, page 3-22

Using Call Features, page 3-24

Configuring a Dial Plan, page 3-33

System Administration, page 3-37

Troubleshooting FAQ, page 3-42

Using the 900 Series LCD Display

All Linksys IP phone models provide an LCD display except for the SPA901, which you configure using the Interactive Voice Response (IVR) interface, described in the “Using the Administration Web Server” section on page 2-12. This section describes the basic functions of the LCD display and includes the following topics:

SPA900 Series LCD Display Controls, page 3-1

Entering and Saving Settings, page 3-4

Call Appearances and Extensions, page 3-21

Using Soft Keys, page 3-3

SPA900 Series LCD Display Controls

The LCD display on the SPA900 Series IP phones provides menu options for operating, configuring and monitoring the IP phone. For information about each of these options, refer to Chapter 4, “SPA900 Series LCD Command Reference”. Figure 3-1illustrates the main controls on the LCD display.

 

 

Linksys IP Phone Administrator Guide

 

 

 

 

 

 

 

Firmware Version 5.1

 

 

3-1

 

 

 

 

 

Page 44
Image 44
Linksys SPA 900 SERIES manual Using the 900 Series LCD Display, SPA900 Series LCD Display Controls