Configuring Super Speed

This mode allows two hard disks to access data simultaneously. The dual channel design can largely enhance hard disk transfer rate.

• We recommend that you use two new hard disks for this setup.

•This setup erases all original data in both hard disks. Ensure to back up all data in the hard disks before using this setup.

To start Super Speed configuration:

1.Click Super Speed from the main screen.

If you are in EZ Backup mode, click Mode Change to return to the main screen.

2.Click Apply to start configuration.

3.A warning message appears, reminding you that all original data in the two hard disks will be erased. Click Ok to continue.

4.The setup is completed. Click Ok to restart your computer at once.

5.After restarting your computer, the Drive Xpert icon on the Windows® notification area turns green to indicate that Super Speed is set up successfully.

If one hard disk is corrupt, all data in both hard disks will be lost.

ASUS P5Q-E Series

4-41