6.Use the up/down arrow key to select the stripe size for the RAID 0 array, and then press <Enter>. The available stripe size values range from 4 KB to 128 KB. The default stripe size is 128 KB.

We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing.

7.Enter the RAID volume capacity that you want and press <Enter>. The default value indicates the maximum capacity allowed.

8.Press <Enter> when the Create Volume item is highlighted. The following warning message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9.Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the Create Volume menu.

4-64

Chapter 4: Software support