Changing to Normal Mode

This mode allows you to disable the Drive Xpert function and use the two SATA connectors as the other onboard SATA connectors.

When using one hard disk in Normal Mode, connect the hard disk to the SATA_E1 (orange, port 0) connector on the motherboard.

To change to Normal Mode:

1.Click Mode Change to return to the main screen.

2.Click Disable to start configuration.

3.The setup is completed. Click Ok to restart your computer at once.

4.After restarting your computer, the Drive Xpert icon on the Windows® notification area turns gray to indicate that the Drive Xpert function is disabled.

4-42

Chapter 4: Software support