EZ Backup

To start EZ Backup configuration:

1.Click EZ Backup from the main screen.

2.Check if the SATA cables and power cords are installed properly. Click Next to continue.

3.Click Next to continue the configuration.

4.Before proceeding, ensure that you have back up all original data in the hard disk connected to the SATA_E2 (white, port 1) connector on the motherboard. Otherwise, the system erases all data in the port 1 hard disk. Click Next to continue.

5.The setup is completed. Click OK to close the configuration window.

ASUS P5Q-E Series

4-47