3.8.2Drive Xpert Control [Auto]

Allows you to enable or disable the Drive Xpert feature.

Configuration options: [Auto] [Enabled] [Disabled]

3.8.3Drive Xpert Mode Update [Last setting]

Set this item to [Mode change] to show further settings of the Drive Xpert feature. Configuration options: [Last setting] [Mode change]

Update To Super Speed [Press Enter]

This item appears only when you set the Drive Xpert Mode Update item to [Mode change] and allows you to use Super Speed function. Plug two identical SATA hard drives in the orange SATA port labeled SATA_E1 (port 0) and the white SATA port labeled SATA_E2 (port 1) and press the <Enter> key.

Update To EZ Backup [Press Enter]

This item appears only when you set the Drive Xpert Mode Update item to [Mode change] and allows you to use EZ Backup function. Plug two identical SATA hard drives in the orange SATA port labeled SATA_E1 (port 0) and the white SATA port labeled SATA_E2 (port 1) and press the <Enter> key.

•Make necessary backup before using the Drive Xpert function:

All original data of the SATA_E2 (white, port1) hard drive will be erased for EZ Backup setup.

All original data of the two hard drives will be erased for Super Speed setup.

•All changes spend 5 seconds to take effect.

•Refer to 4.3.11 ASUS Drive Xpert for detailed application instructions.

Update To Normal mode [Press Enter]

This item appears only when you set the Drive Xpert Mode Update item to [Mode change] and uses the orange SATA port labeled SATA_E1 (port 0) and the white SATA port labeled SATA_E2 (port 1) as normal SATA ports.

ASUS P5Q-E Series

3-39