2.4.3Installing a DIMM
Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components.
To install a DIMM
1. Unlock a DDR2 DIMM socket by pressing the retaining clips outward.
2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 1
Unlocked retaining clip
2
DDR2 DIMM notch
1
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.
3.Firmly insert the DIMM into the socket until the retaining clips snap back
in place and the DIMM is properly seated.
|
| Locked Retaining Clip |
2.5.4 | Removing a DIMM |
|
To remove a DIMM | 2 | |
| ||
1. Simultaneously press the | 1 | |
retaining clips outward to unlock |
| |
the DIMM. |
| |
|
| 1 |
|
| DDR2 DIMM notch |
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force.
2.Remove the DIMM from the socket.
ASUS P5Q WS |