3.5.2Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.

BIOS SETUP UTILITY

Advanced

Advanced Chipset Settings

WARMING: Setting wrong values in below sections may cause system to malfunction.

North Bridge Configuration

NEC PCI-X Hub Configuration

Configure North Bridge features.

North Bridge Configuration

BIOS SETUP UTILITY

 

Advanced

 

 

North Bridge Chipset Configuration

ENABLE: Allow

 

 

 

 

remapping of

Memory Remap Feature

[Enabled]

overlapped PCI memory

PCI MMIO Allocation: 4GB To 3328MB

above the total

Initiate Graphic Adapter

[PEG/PCI]

physical memory.

 

DISABLE: Do not allow remapping of memory.

Memory Remap Feature [Enabled]

Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64-bit operating system.

Configuration options: [Disabled] [Enabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI]

NEC PCI-X Hub Configuration

BIOS SETUP UTILITY

Advanced

Configure advanced settings for PCI-X Hub

PCI Bus Frequency

[Auto]

I/O Port Decode

[4K Decode]

RAS Sticky

Error Handling

[Clear Errors]

VGA 16-Bit

Decode

[Enabled]

This question will allow to select the maximum PCI bus speed to be programmed. Default will always be set to AUTO where bus speed will be decided based on the capabilities of the device on that bus.

3-26

Chapter 3: BIOS setup