2.7.3Internal connectors

1.Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.

The S/PDIF module is purchased separately.

2.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

Chapter 2

•

•

We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

If�� you��� ����want ��to connect������� �a high���������������-definition front����� panel����� audio����� module������ to�� this���� connector,���������� set���

the Front Panel Type item in the BIOS setup to [HD Audio]; if you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD Audio].

ASUS P6T SE

2-27