3 Chapter

3.6.3Onboard Device Configuration

BIOS SETUP UTILITY

Advanced

 

Onboard

Devices Configuration

 

 

 

 

 

 

 

 

 

Options

 

 

High Definition Audio

[Enabled]

 

Enabled

 

Front Panel Type

[HD Audio]

 

 

SPDIF Mode Setting

[SPDIF Output]

 

Disabled

 

J-Micron eSATA/PATA Controller [Enabled]

 

 

 

 

Controller Mode

[IDE]

 

 

 

 

Realtek LAN

[Enabled]

 

 

 

 

LAN Boot ROM

[Disabled]

 

 

 

 

Onboard 1394 Controller

[Enabled]

 

 

 

High Definition Audio [Enabled]

Allows you to enable or disable the High Definition Audio Controller.

Configuration options: [Enabled] [Disabled]

Front Panel Type [HD Audio]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio]

SPDIF Mode Setting [SPDIF Output]

If you want to transfer digital audio signal using the HDMI port on your VGA card, set this item to [HDMI Output]. If you want to transfer digital audio signal using the onboard S/PDIF port, set this item to [SPDIF Output].

Configuration options: [HDMI Output] [SPDIF Output]

J-Micron eSATA/PATA Controller [Enabled]

Allows you to enable or disable the J-Micron eSATA/PATA controller.

Configuration options: [Enabled] [Disabled]

Controller Mode [IDE]

Allows you to select the J-Micron controller mode. Configuration options: [IDE] [AHCI]

Realtek LAN [Enabled]

Allows you to enable or disable the onboard Realtek LAN.

Configuration options: [Enabled] [Disabled]

LAN Boot ROM [Disabled]

This item appears only when you enable the previous item.

Configuration options: [Disabled] [Enabled]

Onboard 1394 Controller [Enabled]

Allows you to enabled or disable the onboard IEEE 1394a controller.

Configuration options: [Enabled] [Disabled]

3-22

Chapter 3: BIOS setup