3 Chapter

3.2.2ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a DOS‑based utility. The EZ Flash 2 utility is built in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On Self Tests (POST).

Before you start using this utility, download the latest BIOS from the ASUS website at www. asus.com.

To update the BIOS using EZ Flash 2

1.Insert the USB flash disk that contains the latest BIOS file to the USB port, and then launch EZ Flash 2 in any of these two ways:

•Press <Alt> + <F2> during POST to display the following.

•Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press <Enter> to enable it.

ASUSTek EZ Flash 2 BIOS ROM Utility V3.34

FLASH TYPE: MXIC 25L8005

 

Current ROM

Update ROM

BOARD: P6T SE

BOARD: Unknown

VER: 0302

VER: Unknown

DATE: 12/19/2008

DATE: Unknown

PATH: A:\

 

A:

 

Note

[Enter] Select or Load

[Tab] Switch

[V] Drive Info

[Up/Down/Home/End] Move

[B] Backup

[Esc] Exit

2.Press <Tab> to switch between drives until the correct BIOS file is found. When found,

EZ Flash 2 performs the BIOS update process and automatically reboots the system when done.

•This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.

•DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Setup Defaults item under the Exit menu. See section 3.10 Exit Menu for details.

3-4

Chapter 3: BIOS setup