12.ASUS Q-Connector (system panel)

Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables. Refer to the following instructions to install the ASUS Q-Connector.

1.Connect the front panel cables to the ASUS Q-Connector.

Refer to the labels on the Q-Connector to know the detailed pin definitions, and then

match them to their respective front panel

LED+

_LED

 

IDE_

 

LED-

IDE

 

 

cable labels.

 

 

 

IDE_

 

 

 

 

 

 

 

The labels on the front panel cables

 

 

SW

may vary depending on the chassis

PWR

POWER

 

 

 

 

 

model.

Ground

 

 

 

 

 

 

SW

 

Reset

RESET

 

 

 

 

 

 

Ground

 

 

 

2.Install the ASUS Q-Connector to the system panel connector, making sure the orientation matches the labels on the motherboard.

Chapter 2

3.The front panel functions are now enabled.

The figure shows the Q-Connector is properly installed on the motherboard.

ASUS P6T SE

2-35