5.The Select New Array Type screen appears.

Use the arrow keys to select Create IM Volume, then press <Enter>.

LSI Logic Config Utility

v6.16.00.00 (2007.05.07)

Select New Array Type -- SAS1068E

 

Create IM Volume

Create IME Volume

Create Integrated Mirror Array of 2 disks plus up to 2 optional hot spares. Data on the primary disk may be migrated.

Create Integrated Mirrored Enhanced Array of 3 to 10 disks including up to 2 optional hot spares.

ALL DATA on array disks will be DELETED!

 

Create IS Volume

 

Create Integrated Striping array of

 

 

 

 

2 to 10 disks.

 

 

 

 

ALL DATA on array disks will be DELETED!

 

 

 

 

 

Esc =

Exit Menu

F1/Shift+1 = Help

Enter

= Choose array type to create

 

 

 

 

 

6.The Create New Array screen shows the disks you can add to make up the IM volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk column. To include this disk in the array, press <+>, <->, or <Space>.

You may also specify the Hot Spare disk here. Select the disk, then move the cursor to the Hot Spr column, then press <+>, <->, or <Space>.

 

 

LSI Logic Config Utility

v6.16.00.00 (2007.05.07)

 

 

 

 

 

Create New Array --

SAS1068E

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Array Type:

 

 

IM

 

 

 

 

 

 

 

 

 

Array Size(MB):

 

 

------

 

 

 

 

 

 

 

 

Slot

Device Identifier

 

RAID

Hot

Drive

Pred

Size

 

 

 

Num

 

 

 

Disk

Spr

Status

Fail

(MB)

 

 

 

 

0

SEAGATE ST373454SS

0003

[NO]

 

[NO]

-------

----

70007

 

 

 

1

SEAGATE ST373454SS

0003

[NO]

 

[NO]

-------

----

70007

 

 

2

SEAGATE ST373454SS

0003

[NO]

 

[NO]

-------

----

35003

 

 

3

SEAGATE ST373454SS

0003

[NO]

 

[NO]

-------

----

35003

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Esc = Exit Menu F1/Shift+1 = Help

 

SPACE/+/- = Select disk for array or hot spare

C = Create array

By default, the RAID Disk field shows No before array creation. This field is grayed out under the following conditions:

•The disk does not meet the minimum requirements for use in a RAID array.

•The disk is not large enough to mirror existing data on the primary drive.

•The disk has been selected as the Hot Spare for the RAID array.

•The disk is already part of another array.

ASUS P7F-C Series

5-17