4.Insert the RAID driver disk to the floppy disk drive. Make sure that Installation from the Boot Options menu is selected, then press <Enter>.

Boot from Hard Disk

Installation

Installation--ACPI Disabled

Installation--Local APIC Disabled

Installation--Safe Settings

Rescue System

Memory Test

Boot Options

F1 Help F2 Language F3 1280 x 1024 F4 DVD F5 Driver

If you install SLES 10, type brokenmodules=ahci after Boot Options and press Enter to continue.

5.When below screen appears, select the floppy disk drive (fd0) as the driver update medium. Select OK, then press <Enter>.

Please choose the Driver Update medium.

fd0: Floppy

sr0: CD-ROM, TEAC DV-516E

sda: Disk, SEAGATE ST336754SS

sdb: Disk, SEAGATE ST336754SS Other device

OKBack

The drivers for the RAID controller are installed to the system.

6-18

Chapter 6: Driver installation