5.3.4Managing Arrays
The LSI Logic MPT Setup Utility allows you to perform other tasks related to configuring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties:
1.On the main menu, select RAID Properties.
| LSI Logic Config Utility | v6.16.00.00 (2007.05.07) |
| ||||||
| Adapter Properties |
|
|
|
|
|
| ||
|
| Adapter |
|
| SAS1068E |
|
| ||
|
|
|
|
|
| ||||
|
| PCI Slot |
| 00 |
|
|
| ||
|
| PCI Address(Bus/Dev/Func) | 04:00:00 |
|
|
| |||
|
| MPT Firmware Revision |
|
|
| ||||
|
| SAS Address |
|
| 500E0101:23456712 |
|
| ||
|
| NVDATA Version |
|
| 2B.00 |
|
| ||
|
| Status |
|
| Enabled |
|
| ||
|
| Boot Order |
| 0 |
|
|
| ||
|
| Boot Support |
|
|
| (Enabled BIOS & OS) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RAID Properties |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SAS Topology |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Advanced Adapter Properties |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Esc = Exit Menu | F1/Shift+1 = Help |
| ||||||
| Enter = Select Item |
| |||||||
|
|
|
|
|
|
|
|
|
|
2.On the next screen that appears, select View Existing Array.
LSI Logic Config Utility | v6.16.00.00 (2007.05.07) |
Select New Array Type | |
View Existing Array | View the existing configuration. |
Create IM Volume
Create IME Volume
Create IS Volume
Create Integrated Mirror Array of 2 disks plus up to 2 optional hot spares. Data on the primary disk may be migrated.
Create Integrated Mirrored Enhanced Array of 3 to 10 disks including up to 2 optional hot spares.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of 2 to 10 disks.
ALL DATA on array disks will be DELETED!
| Esc = | Exit Menu | F1/Shift+1 = Help |
| |||
| Enter | = Choose array type to create | |
|
|
|
|
ASUS |