5.3Intel® Rapid Storage Technology Option ROM Utility

The Intel® Rapid Storage Technology Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.

To enter the Intel® Rapid Storage Technology option ROM utility:

1.Install all the Serial ATA hard disk drives.

2.Turn on the system.

3.During POST, press <Ctrl+I> to display the utility main menu.

Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008

Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.

 

 

 

 

[ MAIN MENU ]

 

 

 

 

 

3. Reset Disks to Non-RAID

 

 

1. Create RAID Volume

 

 

2. Delete RAID Volume

5. Exit

4. Recovery Volume Options

 

 

 

 

 

 

 

 

 

[ DISK/VOLUME INFORMATION ]

 

RAID Volumes:

 

 

 

* = Data is Encrypted

None

defined.

 

 

 

 

Physical Devices:

 

 

 

 

Port Drive Model

Serial #

Size

Type/Status(Vol ID)

0

ST3160812AS

9LS0HJA4

149.0GB

Non-RAID Disk

1

ST3160812AS

9LS0F4HL

149.0GB

Non-RAID Disk

2

ST3160812AS

3LS0JYL8

149.0GB

Non-RAID Disk

3

ST3160812AS

9LS0BJ5H

149.0GB

Non-RAID Disk

[↑↓]-Select

[ESC]-Exit

[ENTER]-Select Menu

The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.

ASUS P8B-C series

5-25