5.3.4Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive.

To reset a RAID set hard disk drive:

1.From the utility main menu, select 3. Reset Disks to Non-RAIDand press <Enter>. The following screen appears.

[ RESET RAID DATA ]

Resetting RAID disk will remove its RAID structures and revert it to a non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost. (This does not apply to Recovery volumes)

Port

Drive Model

Serial #

Size

Status

 

0

ST3160812AS

9LS0HJA4

149.0GB

Member Disk

1

ST3160812AS

9LS0F4HL

149.0GB

Member

Disk

Select the disks that should be reset.

[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

2.Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and then press <Space> to select.

3.Press <Enter> to reset the RAID set drive(s). A confirmation message appears.

4.Press <Y> to reset the drive(s) or press <N> to return to the utility main menu.

5-30

Chapter 5: RAID configuration