The LSI Corporation MPT Setup Utility is an integrated RAID solution that allows you to create the following RAID sets from SAS hard disk drives supported by the LSI 2008 controller: RAID 0, RAID 1, RAID 1E, and RAID 10.
•You may use disks of different sizes in one volume; however, the size of the smallest disk determines the “logical” size of each member disk.
•DO NOT combine Serial ATA and SAS disk drives in one volume.
•The RAID setup screens shown in this section are for reference only and may not exactly match the items on your screen due to the controller version difference.
•The adapter name shown on the setup screens differs according to the installed SAS RAID card.
•Before requesting support from the ASUS Technical Support team, you have to take note of the MPTFW and MPTBIOS version for the SAS controller. After entering the SAS configuration utility, you can see below screen and identify the MPTFW and MPTBIOS version:
MPTFW version:
MPTBIOS version: v7.07.00.00 (2010.04.30)
| LSI Corp Config Utility |
| v7.07.00.00 (2010.04.30) |
|
|
|
| ||||
| Adapter List | Global Properties |
|
|
|
|
|
| |||
| Adapter |
| PCI | PCI | PCI | PCI | FW Revision | Status | Boot |
| |
|
|
| BUS | Dev | Fnc | Slot |
|
| Order |
| |
| SAS 2008 |
| 01 | 00 | 00 | 00 | Enabled | 0 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| Esc = Exit Menu | F1/Shift+1 = Help |
|
|
|
|
| ||||
| Alt+N = Global Properties |
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
ASUS |