4.5.7SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
SATA Configuration |
|
| (1) IDE Mode. (2) AHCI Mode. |
SATA Mode | [IDE Mode] |
| (3) RAID Mode. |
|
| ||
[Enhanced] |
|
| |
[Enhanced] |
|
| |
S.M.A.R.T. Status Check | [Enabled] |
|
|
SATA Port1 | ST3160812AS | (160.0GB) |
|
SATA Port2 | ST3160812AS | (160.0GB) |
|
SATA Port3 | ASUS | ATAPI |
|
SATA Port4 | Not Present |
|
|
SATA Port5 | Not Present |
|
|
SATA Port6 | Not Present |
|
|
|
|
SATA Mode [IDE Mode]
Allows you to set the SATA configuration.
Configuration options: [Disabled] [IDE Mode] [AHCI Mode] [RAID Mode]
•If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices, keep the default setting [IDE Mode].
•If you want the Serial ATA hard disk drives to use the Advanced Host
Controller Interface (AHCI), set this item to [AHCI Mode]. The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.
•If you want to create RAID sets with LSI MegaRAID utility, or Intel® Rapid Storage Technology from the Serial ATA hard disk drives, set this item to
[RAID Mode].
Serial-ATA Controller 0 [Enhanced]
This item appears only when you set the SATA Mode item to [IDE Mode]. Set to [Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s devices. Set to [Compatible] when using Windows
Configuration options: [Disabled] [Enhanced] [Compatible]
Serial-ATA Controller 1 [Enhanced]
This item appears only when you set the SATA Mode item to [IDE Mode]. Set to [Enhanced] to support two SATA 3.0 Gb/s devices. Configuration options: [Disabled] [Enhanced]
ASUS |