Asus PG191 manual OSD On-Screen Display menu, How to reconfigure, OSD function introduction

3.1OSD (On-Screen Display) menu

3.1.1How to reconfigure

1.Touch the sensor to activate the OSD menu.

2.Touch and to navigate through the functions. Highlight and

activate the desired function by touching the sensor. If the

function selected has a sub-menu, touch and again to navigate through the sub-menu functions. Highlight and activate the

desired sub-menu function by touching the sensor.

3.Touch and to change the settings of the selected function.

4.To exit the OSD menu, touch the sensor. Repeat step 2 and step 3 to adjust any other function.

3.1.2OSD function introduction

See the table on the next page for details.

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.

•Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.

3 - 2 Chapter 3: General Instruction