2.5.2Reinstalling the riser card bracket
To reinstall the riser card bracket:
1.Take note of the holes on the riser card bay. The three pegs on the riser card bracket should match these holes to ensure that the bracket is properly in place.
2.Install the riser card bracket with the card into the PCI Express x8 and
3.Press the riser card bracket until the golden connectors completely fit the slot and the bracket aligns with the rear panel.
4.Connect the cable(s) to the card, if applicable.
Pegs on the riser car d bracket
ASUS | 2 - 15 |