2.8.3Device fan
The system comes with two 28 mm * 40 mm (15500 rpm) device fans.
Refer to the illustration below for location of the device fans.
28 mm * 40 mm device fans
To uninstall the device fan:
1.Disconnect the device fan cable from the connector on the motherboard or backplane board.
2.Lift the fan, then set aside.
To reinstall the device fan:
1.Insert the fan to the fan cage. The airflow directional arrow on the fan side should point towards the rear panel.
2.Connect the device fan cable to the fan connector on the backplane board or on the motherboard.
2 - 22 | Chapter 2: Hardware setup |