5.3.5Primary/Secondary/Third IDE Master/Slave
The BIOS automatically detects the connected IDE devices. There is a separate
BIOS SETUP UTILITY
Main
Primary IDE Master
Device | : Hard Disk |
Vendor | : ST320413A |
Size | : 20.0GB |
LBA Mode | : Supported |
Block Mode | : 16 Sectors |
PIO Mode | : Supported |
Async DMA | : MultiWord |
Ultra DMA | : Ultra |
SMART Monitoring: Supported
Type | [Auto] |
LBA/Large Mode | [Auto] |
PIO Mode | [Auto] |
DMA Mode | [Auto] |
SMART Monitoring | [Auto] |
32Bit Data Transfer | [Disabled] |
Select the type of device connected to the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These values are not
Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate IDE device type. Select [CDROM] if you are specifically configuring a
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto]
BlockEnables or disables data
ASUS | 5 - 17 |