2.9 Installing a hard disk drive (HDD)

The system supports one UltraATA133 IDE or one Serial ATA hard disk drive.

To install an IDE hard disk drive:

1.Locate the HDD tray lock screw

on the other side of the chassis.

2. Remove the lock screw with a Philips screw driver. Keep the screw for later use.

1

2

3.Slide the HDD tray outward until

the tray slots are released from

 

the chassis hooks.

Tray locks

 

 

3

Lock slots

Tray locks

4. Place a hard disk drive on the

 

tray with its bottom on the open

5

side. Align the HDD and HDD

4

tray screw holes.

 

5. Secure the HDD with four screws.

5

Configure your hard disk drive as Master device before connecting the IDE cable and power plug. Refer to the HDD documentation on how to set the drive as a Master device.

ASUS Terminator 2 barebone system

37