8.Connect a power cable from the power supply unit to the

power connector at the back of

8

the optical drive. See page 40

for details.

 

10

9

9. Connect one end of the IDE

ribbon cable to the IDE interface at the back of the

optical drive, matching the red stripe on the cable with Pin 1 on the IDE interface.

10.Connect one end of the optical drive audio cable to the 4-pin connector at the back of the optical drive.

11.Connect the other end of the IDE ribbon cable to the secondary IDE connector (black connector labeled SEC_IDE) on the motherboard. See page 82 for the location of the secondary IDE connector.

12.Connect the other end of the audio cable to the 4-pin CD1 connector on the motherboard. See page 84 for the location of the CD audio connector.

13.Re-install the front panel cover

by aligning its hooks with the chassis holes.

On Deluxe models, re-connect

the LED panel and the front

13 audio button panel cables to

their respective connectors before re-installing the front

panel cover.

14. Lock the front panel cover hooks to the chassis holes as indicated.

14

36

Chapter 2: Basic installation