Manuals / Brands / Computer Equipment / Personal Computer / Asus / Computer Equipment / Personal Computer

Asus T2-P VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage, SMART Q-FanFunction [Enabled], Fan Auto Mode Start Voltage [5.0V], Fan Auto Mode Start Temp [30ºC]

1 130

Download 130 pages, 3.68 Mb

VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

If any of the monitored items is out of range, the following error message appears: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue or DEL to enter SETUP”.

SMART Q-Fan Function [Enabled]

This item allows you to enable or disable the ASUS Smart Q-Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Enabled] [Disabled]

The following items appear only when the Smart Q-Fan Function item is set to Enabled.

Fan Auto Mode Start Voltage [5.0V]

This item allows you to select the voltage for the auto start fan feature. The fan starts when the system reaches the specified voltage.

Configuration options: [4.0V] [4.5V] [5.0V] [5.5V] [6.0V]

Fan Auto Mode Start Temp [30ºC]

Select the temperature for the auto start fan feature. The fan starts when the system reaches the specified temperature.

Configuration options: [25ºC]...[75ºC]

Fan Auto Mode Full Speed Temp [70ºC]

Select the temperature for the fan to rotate in full speed. The fan switches to full speed when the system reaches the specified temperature. Configuration options: [25ºC]...[75ºC]

118	Chapter 5: BIOS setup

Contents

Page E1520 Revised Edition February Chapter 1: System introduction Chapter 2: Basic installation Chapter 3: Starting up Chapter 4: Motherboard info Chapter 5: BIOS setup Appendix Federal Communications Commission Statement Canadian Department of Communications Statement Electrical safety Operation safety CLASS 1 LASER PRODUCT Audience How this guide is organized Conventions used in this guide Where to find more information Item Description T2-PEditions System introduction Deluxe model Basic model Chapter 1: System introduction Floppy drive door Optical drive door Eject button Second optical drive door Power button STOP button PREVIOUS button Radio mode NEXT button 17.Volume down button (–). Press this button to decrease the system volume Deluxe model Basic model Floppy disk drive Optical drive CompactFlash Headphone port Microphone port USB 2.0 ports 2.0) 4-pin GAME/MIDI port Telephone port RJ-11 port ( ) Serial port VGA port Parallel port Line Out port Line In port Audio ports function variation Video In port Cable TV connector Link LED AIR LED Gigabit LAN port Page Audio DJ mode Page Basic installation Basic components to install Tool 2.3 Removing the cover Page 2.5.1 Removing the CPU fan and heatsink assembly 2.5.2 CPU installation 2.5.3 Re-installingthe CPU fan and heatsink assembly 2.6.1 Memory configurations Table 1: Qualified DDR400 vendors list Table 2: Memory frequency/CPU FSB synchronization 2.6.2 DIMM installation 2.7.1 Expansion slots PCI slot AGP slot 2.7.2 Expansion card installation 2.7.3 Configuring an expansion card Standard interrupt assignments IRQ assignments for this motherboard Page Page Page Page Page Voltage selector 2.11 Replacing the cover To the front panel To the rear panel Page Starting up Chapter 3: Starting up 3.3.1 Running the support CD 3.3.2 Drivers menu Intel Chipset INF Update Program Intel(R) Extreme Graphics Driver AD1888 SoundMAX® Audio Driver 3.3.3 Utilities menu LifeView TVR Application ASUS Radio Application ASUS PC Probe Install ASUS Update 3.3.4 ASUS contact information 3.3.5 Other information 3.4.1 Multi-channelaudio feature Setting to multi-channelaudio Test Test Listening Environment window Play Test Noise Close 10.The MIDI Music Synthesizer tab allows you to select a setting for the MIDI Adjusting the volume settings Adjusting the microphone settings 3.4.2 ASUS Radio Player Launching the ASUS Radio Player Storing a radio station Editing a stored radio 3.4.3 ASUS Instant Music To enable ASUS Instant Music: Esc Space Bar <F2 <Enter 3.4.4 LifeView® TVR Application Using LifeView® TVR 3.5.1 Playing an audio CD/DVD 3.5.2 Tuning into an FM radio station 3.5.3 Presetting a station 3.5.4 Adjusting the volume Features 3.6.1 LED indicators 3.6.2 Antenna installation 3.6.3 Installing the utilities and driver 3.6.4 Other support CD options 3.6.5 The Control Center utility Control Center icons Control Center right-clickmenu Page Rescan Change SSID Search and Connect Connection IP Config IP Address Ping Stop Clear Basic Network Name Channel Data Rate PS Mode Others Two ways to assign WEP keys Manual Assignment Automatic Generation APPLY Soft AP SoftAP/STA Mode Enable ICS Enable Firewall Site Survey BSSID SSID RSSI Type Change Mode Control Center left-clickmenu Page Motherboard info Page Clear RTC RAM (CLRTC) 1.Front panel USB connector (10-1pin USB56) 2.Front panel audio connector (10-1pin FP_AUDIO) 3.Digital audio connector (4-1pin SPDIF_OUT) 4.USB connector (10-1pin USB78) 5.Modem connector (10-1pin MDC) 6.I/O extension module (22-pinIOC_MB) 7.CPU and chassis fan connectors (3-pinCPU_FAN, CHA_FAN) 8.ATX power connectors (20-pinATXPWR, 4-pinATX12V) 9.IDE connectors (40-1pin PRI_IDE, SEC_IDE) 10.Serial ATA connectors (7-pinSATA2, SATA1) Important notes on Serial ATA (SATA) Native Legacy 11.Internal audio connectors (4-pinAUX1, CD1) 12.Floppy disk drive connector (34-1pin FLOPPY) 13.System panel connector (8-1pin PANEL) •Power LED Lead •ATX Power Switch •IDE LED Lead Page BIOS setup 5.1.1Creating a bootable floppy disk DOS environment Windows® XP environment 5.1.2 Using AFUDOS to copy the current BIOS 5.1.3 Using AFUDOS to update the BIOS Page 5.1.4 Using ASUS EZ Flash to update the BIOS 5.1.5 Recovering the BIOS with CrashFree BIOS Page 5.1.6 ASUS Update Auto Select Save Page 5.2.1 BIOS menu screen 5.2.2 Menu bar 5.2.3 Navigation keys 5.2.4 Menu items 5.2.5 Sub-menuitems 5.2.6 Configuration fields 5.2.7 Pop-upwindow 5.2.8 Scroll bar 5.3.1 System Time [xx:xx:xxxx] 5.3.2 System Date [Day xx/xx/xxxx] 5.3.3 Legacy Diskette A [1.44M, 3.5 in.] 5.3.4 Primary and Secondary IDE Master/Slave; Third and Fourth IDE Master 5.3.5 IDE Configuration Onboard IDE Operate Mode [Enhanced Mode] 5.3.6 System Information AMI BIOS Processor System Memory 5.4.1 CPU Configuration Ratio CMOS Setting [26] L3 Cache [Enabled] Max CPUID Value Limit [Disabled] Hyper-ThreadingTechnology [Enabled] 5.4.2 Chipset DDR Reference Voltage [Auto] DRAM Frequency [Auto] Configure DRAM Timing by SPD [Enabled] Internal Graphic Acceleration Mode [Auto] Graphic Adapter Priority [AGP/Int-VGA] Onboard Video Memory [Enabled, 8MB] Graphics Aperture Size [64MB] Boot Display Device [Auto] Flat Panel Display [640x480LVDS] TV Standard [Auto] 5.4.3 Onboard Devices Configuration OnBoard AC’97 Audio [Auto] OnBoard LAN [Enabled] Serial Port1 Address [3F8/IRQ4] Parallel Port Address [378] Onboard Game Port [Enabled] Onboard MIDI Port [Disabled] 5.4.4 PCI PnP Plug and Play O/S [No] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] Palette Snooping [Disabled] PCI IDE BusMaster [Enabled] IRQ xx [Available] 5.4.5 USB Configuration USB Function [8 USB Ports] Legacy USB Support [Auto] USB 2.0 Controller [Enabled] USB 2.0 Controller Mode [FullSpeed] USB Mass Storage Device Configuration 5.4.6 Instant Music Configuration Instant Music [Disabled] Instant Music CD-ROMDrive [IDE Secondary Master] Radio Region [EUROPE] 5.5.1 Suspend Mode [Auto] 5.5.2 Repost Video on S3 Resume [No] 5.5.3 ACPI 2.0 Support [No] 5.5.4 ACPI APIC Support [Enabled] 5.5.5 APM Configuration Restore on AC Power Loss [Power Off] Power On By PS/2 Devices [Disabled] Power On By External Modems [Disabled] Power On By PCI Devices [Disabled] 5.5.6 Hardware Monitor CPU Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] CPU Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage SMART Q-FanFunction [Enabled] Fan Auto Mode Start Voltage [5.0V] Fan Auto Mode Start Temp [30ºC] Fan Auto Mode Full Speed Temp [70ºC] 5.6.1 Boot Device Priority 1st ~ xxth Boot Device [1st Floppy Drive] 5.6.2 Removable Drives 1st ~ xxth Drive [1st Floppy Drive] 5.6.3 CDROM Drives 1st ~ xxth Drive [SM-OpticalDrive Name] 5.6.4 Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled] Add On ROM Display Mode [Force BIOS] Bootup Num-Lock[On] Typematic Rate [Fast] Boot to OS/2 [No] Wait for ‘F1’ If Error [Enabled] Hit ‘DEL’ Message Display [Enabled] Interrupt 19 Capture [Disabled] 5.6.5 Security Change Supervisor Password User Access Level (Full Access] Change User Password Clear User Password Password Check [Setup] Boot Sector Virus Protection [Disabled] Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Appendix Input characteristics A.1.3 Over-VoltageProtection (OVP) channels A-3 A-4