Connectors

SETUP H/W .3

3.HARDWARE SETUP

4)Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port.

TRL-DLS

WOR

1 2

Ground Ring#

TRL-DLS Wake-On-Ring Connector

5)Chassis Intrusion Connector (CHASSIS)

This connector is designed for chassis intrusion detection. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When any chassis component is removed, the sensor triggers and sends a high- level signal to this connector to record a chassis intrusion event.

 

CHASSIS

TRL-DLS

 

 

 

+5Volt Supply Stand By)

Chassis Signal Ground

TRL-DLS Chassis Intrusion Lead

(Power

 

 

 

26

ASUS TRL-DLS User’s Manual