NetwareNovell

InstallationDriver.5

5.OS Driver Installation

3.Highlight Disk and CD-ROM Drivers (e.g., IDEATA). Press Enter and load an additional driver. Then press the INS key. The system always defaults to the A: path. Highlight the HAM driver and press Enter. Select Yes to save and move the driver into the operating system. Press Enter, the system will start to copy the files.

4.Load a separate instance of the driver for every Adaptec SCSI controller channel or host adapter present in the system. Load the Adaptec SCSI driver twice with different slot number from STARTUP.NCF file as follows:

load ADPT160M.HAM Slot=10012 load ADPT160M.HAM Slot=10013

5.When prompted for a slot number, accept the slot numbers displayed. Make sure to write these slot numbers down for future reference.

6.When asked to edit the STARTUP.NCF file, make sure that the ADPT160M.HAM is loaded once for each Adaptec controller SCSI channel present in the system. Add the statement SLOT=<slot number> to each load line in the STARTUP.NCF, by specifying the slot numbers written down in step 5 above, with only one slot number per load instance.

II.Intel® 82550 Network Driver Installation

A. Preparing Intel 82550 LAN Driver Diskette

1.Use the self-extracting image files.

For the Intel(R) PRO/100 Server Adapter driver, the executable file is located here:

\Drivers\Lan\makedisk\makenw.bat

2.Use the manual to create driver diskette.

If you need to use a floppy disk to install the on-board Intel 82550 network adapter drivers, use the MAKEDISK.BAT utility located in the \Drivers\LAN\MAKEDISK directory on ASUS Driver Support CD.

MAKEDISK [operating system] [destination]

80

ASUS TRL-DLS User’s Manual