4.8Security
This menu allows a new password to be created or a current password to be cchanged. The menu also enables or disables the Secure Boot state and lets the user configure the System Mode state.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. | ||||
Main Advanced Event Logs Boot | Monitor | Security | Tool Exit | |
Password Description |
|
|
| Set Setup Administrator |
If ONLY the Administrator’s password is set, then |
| Password | ||
this only limits access to Setup and is only asked |
|
| ||
for when entering Setup. |
|
|
|
|
If ONLY the User’s password is set, then this |
|
| ||
is a power on password and must be entered to |
|
| ||
boot or enter Setup. In Setup the User will have |
|
| ||
Administrator rights. |
|
|
|
|
The password length must be |
|
|
|
|
in the following range: | 3 |
|
|
|
Minimum length |
|
|
| |
Maximum length | 20 |
|
|
|
Administrator Password |
|
|
|
|
User Password |
|
|
|
|
Clear Password |
|
|
|
|
System Boot Menu |
|
|
|
|
HDD Security Configuration: |
|
|
|
|
P1: HardDisk |
|
|
|
|
P2: HardDisk |
|
|
|
|
|
|
|
|
|
Administrator Password
To set an administrator password:
1.Select the Administrator Password item and press <Enter>.
2.From the Create New Password box, key in a password, then press <Enter>.
3.Confirm the password when prompted.
To change an administrator password:
1.Select the Administrator Password item and press <Enter>.
2.From the Enter Current Password box, key in the current password, then press <Enter>.
3.From the Create New Password box, key in a new password, then press <Enter>.
4.Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator password, but press <Enter> when prompted to create/confirm the password.
Chapter 5: BIOS setup |