6.Push the tray lever until it clicks and secures the drive tray in place. The drive tray is correctly placed when its front edge aligns with the bay edge.
7.Repeat steps 1 to 6 if you wish to install another SATAII/SAS drive.
2.6.5Removing and reinstalling the backplane
DO NOT remove the backplane unless necessary!
1.Remove all
2.Disconnect all cables from the SATA/SAS backplane.
3.Loosen the four screws on the backplane.
4.Firmly hold the backplane, lift it upwards. and remove it from the module.
5.Follow the previous instructions in reverse to reinstall the backplane.
ASUS |