5.

Close the load plate (A), ensuring

 

 

that the front edge of the load plate

Load lever

 

slides under the retention lock (B)

 

then push down the load lever (C).

Retention lock

6.Insert the load lever under the retention tab to remove the PnP cap from the CPU socket.

Load

lever

Retention tab

8.Apply some Thermal Interface

Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is evenly spread in a thin layer.

Some heatsinks come with pre-applied Thermal Interface Material. If so, skip this step.

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes or touches your skin, wash it off immediately and seek professional medical help.

2-6

Chapter 2: Hardware setup