2.3Installing the power supply unit (PSU)

We recommend that you install a standard ATX PSU with at least 350 W power output.

To install a PSU:

1.Orient the PSU to the PSU slot.

2.Slide the PSU into the slot until it snugly fits the metal rail.

3.Secure the PSU with screws.

Voltage selector

The PSU has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate voltage according to the voltage supply in your area.

If the voltage supply in your area is 100-127 V, set the switch to 115 V.

If the voltage supply in your area is 200-240 V, set the swtich to 230 V.

Setting the switch to 115 V in a 230 V environment will seriously damage the system!

2 - 4

Chapter 2: Basic installation