5.Re-install the HDD cage to the chassis. Slide in the HDD cage to the bay assembly rails.

6.Carefully push the HDD cage

in the direction of the arrow

5

6

until it snaps to indicate that

 

 

it is secured to the chassis.

 

 

6.Connect a 40-pin IDE cable to the IDE connector at the back of the drive.

7.Connect a 4-pin power plug from the power supply unit to the power connector at the back of the drive.

Refer to the motherboard user guide before connecting an IDE cable to the hard disk drive.

2 - 8

Chapter 2: Basic installation