2.6.2Installing additional 5.25-inch drive(s)

You may install additional 5.25-inch optical drives, zip, or floppy disk drives in the three remaining bays.

Configure your optical drive as Master/Slave device before installing it to the drive bay. Refer to the optical drive documentation for details.

To install an additional optical drive(s):

1.Select the drive bay you intend to use.

2.Remove the face plate covering the drive bay by releasing the protruding tabs.

3.Using a screwdriver, push the knock down metal cover in and out of the chassis until it is removed.

4.Slide the drive bay lock to the

left, towards the sign, to unlock the drive bay.

2 - 12

Chapter 2: Basic installation