9.Connect a 4-pin power plug from the power supply unit to the drive power connector.

2.7Installing a 3.5-inch floppy disk drive

You may install up to two floppy disk drives in the 3.5-inch drive bay under the 5.25-inch drive bays.

Configure your optical drive as Master/Slave device before installing it to the drive bay. Refer to the optical drive documentation for details.

To install a floppy disk drive(s):

1.Select the drive bay you intend to use.

2.Remove the face plate covering the drive bay by releasing the protruding tabs.

2 - 14

Chapter 2: Basic installation