Configuration

3.2.2Access Point (AP) mode

By default, the ASUS Pocket Wireless AP is set to access point (AP) mode. The Setup Wizard auto-detects and displays the device SSID, channel, encryption, MAC, and IP addresses. Click Configure to change these settings.

Basic tab

Network Name (SSID). This field allows you to set the ASUS Pocket Wireless AP SSID. The SSID is an identification string of up to 32 ASCII characters that differentiate the device from other manufacturers.

A wireless client must have the same SSID with the ASUS Pocket Wireless AP to establish connection.

Channel. Select a radio channel the ASUS Pocket Wireless AP uses in

communicating with other wireless device(s). IEEE 802.11b devices are direct sequence spread spectrum devices that spread a radio signal over a range of frequencies. A channel is a range of frequencies used by a direct sequence device.

Click the Encryption tab to configure the device WEP encryption settings.

3-4

ASUS Pocket Wireless Access Point (WL-330)