Configuration

Two ways to assign WEP keys

Manual Assignment. For a 64-bit encryption, enter 10 hexadecimal digits (0~9, a~f, A~F) or 5 ASCII characters in each of the four WEP keys. For 128-bit encryption enter 26 hexadecimal digits (0~9, a~f, A~F) or 13 ASCII characters in each of the four WEP keys.

Automatic Generation. Type a combination of up to 64 letters, numbers, or symbols in the Passphrase field. The Setup Wizard utility uses an algorithm to generate four WEP keys based on the typed combination.

Default Key. This field allows you to specify the default WEP encryption key.

Click OK when finished.

3.2.3Ethernet adapter mode

The Setup Wizard utility also allows you to configure the Ethernet adapter settings of the ASUS Pocket Wireless AP.

To change the Ethernet adapter settings:

1.Switch the ASUS Pocket Wireless AP to Ethernet adapter mode using the mode switch on the bottom of the device.

2.From the Windows® desktop, click Start > All Programs > ASUS Utility > Wireless AP WL-330> Setup Wizard.

The SSID and WEP encryption keys of the ASUS Pocket Wireless AP must be the same with that of the AP or wireless client to establish connection.

3-6

ASUS Pocket Wireless Access Point (WL-330)