Asus manual USB connectors 4-pin USB6, 10-1 pin USB78, Z7S WS USB connectors

4.USB connectors (4-pin USB6, 10-1 pin USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to these connectors, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed.

Z7S WS

USB6

Z7S WS USB connectors

NC

GND

USB_P8+

USB_P8-

USB+5V

USB78

GND

USB_P7+

USB_P7-

USB+5V

The USB port module is purchased separately.

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard.

2-32 Chapter 2: Hardware information