Asus Z7S WS manual Installing a DIMM, Removing a DIMM

2.4.4Installing a DIMM

Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components.

To install a DIMM:			3
1.	Unlock a DIMM socket by pressing		1
	the retaining clips outward.
2.	Align a DIMM on the socket	1	2
	such that the notch on the DIMM
	matches the break on the socket.
3.	Firmly insert the DIMM into the
			DDR2 FB-DIMM notch
	socket until the retaining clips

snap back in place and the DIMM is properly seated.

•A FB-DIMM is keyed with a notch so that it fits in only one direction. Do not

force a DIMM into a socket to avoid damaging the DIMM.

•The FB-DIMM sockets do not support DDR DIMMs. DO NOT install DDR DIMMs to the FB-DIMM sockets.

2.4.5Removing a DIMM

To remove a DIMM:

1.Simultaneously press the retaining clips outward to unlock the DIMM.

	2
Support the DIMM lightly with
your fingers when pressing the	1
retaining clips. The DIMM might
	1
get damaged when it flips out
with extra force.

2.Remove the DIMM from the socket.

ASUS Z7S WS 2-17