Asus Z7S WS manual SSI power connectors 24-pin EATXPWR, 8-pin EATX12V, 4-pin ATX12V

9.SSI power connectors (24-pin EATXPWR, 8-pin EATX12V, 4-pin ATX12V)

These connectors are for SSI power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

		EATXPWR	EATX12V
	24-PIN Power Connector			8-PIN
Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12V3 +3 Volts				+12V4 +12V4 +12V1 +12V1

Z7S WS

Z7S WS ATX power connectors

+3 Volts +12V3 +12V3 +5VStandby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts GND GND GND GND

ATX12V

GND GND

+12V2 +12V2

•For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 600 W.

•Do not forget to connect the 8-pin EATX12V power plug; otherwise, the system will not boot.

•If you install only one CPU on the CPU0 socket, you can connect only the EATXPWR and EATX12V power connectors to boot the system.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•If you want to use two high-end PCI Express x16 cards, use a PSU with 600W power or above to ensure the system stability.

•If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus.com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details.

ASUS Z7S WS 2-35