AT&T 1305 user manual Room Monitor, Turn System Off, Turn System On

R E M O T E O P E R A T I O N

Room Monitor

You can call the answering system and listen to any activity in the room for 15 seconds.

1Connect with the answering system and listen to messages.

2Press 33. You can listen after the beep.

3After 15 seconds, the system exits Room Monitor and beeps twice.

Turn System Off

1Connect with the answering system and listen to messages.

2Press 66, then hang up.

Turn System On

When the system is off, it answers after 10 rings and sounds a three-second tone.

1Enter your four-digit Remote Access Code. You’ll hear a long tone indicating the system is on and ready for a remote command.

2The system plays any messages, then remains on unless you turn it off.

When the Tape is Full

When the recording side of the tape is full, the system answers after 10 rings and beeps.

1Enter your Remote Access Code within eight seconds after the beeps to listen to messages.

2Press 00after you listen to messages to clear them and make room for new messages.

9