I N S T A L L A T I O N
Wall Installation
1 Remove the base.
Slide the base sideways as shown by the REMOVE arrow.
2Install the batteries as shown in Step 2 under Table/Desk Installation.
3Connect the
short line 
cord to the 
telephone. 
Plug the short 
line cord 
into the 
LINE jack
on the back 
of the set. Feed 
the cord through
the channel on the bottom of the set.
4 Reinstall the base.
Turn the base so that the larger end
is toward 
the bottom of the telephone. Insert the base tabs into the slots. Then slide sideways in the direction
of the
INSTALL arrow to lock the base onto the phone.
5 Reverse the handset tab.
To mount the telephone on a wall, you must reverse the handset tab. This tab holds the handset when you hang up. Hold down the switchhook, and slide the tab up and out of its slot (figure 1). Turn the tab so that the end with the “hook” is up (figure 2). Then insert the tab back into its slot (figure 3).
figure 1 | figure 2 | figure 3 |
6 Connect the line cord to the modular jack and mount the phone onto the wall jack.
Plug the free end of the line cord into a modular wall jack. Make sure the cord snaps firmly into place. Place the phone on the wall jack mounting studs and pull down until it is held securely.
7Follow Steps 6 – 8 under Table/ Desk Installation.
2
