CONNECT EACH VOICE TERMINAL TO THE SYSTEM

Place the voice terminal in its designated location.

Plug the voice terminal into the system in one of the following ways:

1
21
2
If You Have And Do This
a direct connection the connection re-
Go on to step 3. You
from the voice ter- quires only a single have already con-
minal to the control modular voice ter- nected the voice ter-
unit minal cord minal to the system in
step 3 of “Prepare
the Voice Terminals,”
page 15.
the connection re- Plug the loose end of
quires one or more the modular voice ter-
modular extension
minal cord into the
cords jack on the extension
cord that terminates
the wiring run from
the control unit loca-
tion. Then go on to
step 3.
a jack field connec- Plug the loose end of
tion to the control unit the modular voice ter-
minal cord into the
wall jack at the voice
terminal location.
Then go on to step 3.
Jack field connection
Direct connection
to control unit

A red light comes on next to a button when you plug in the voice terminal.

16